The Details

PLEASE READ this full description prior to ordering to make sure you get the right version to fit your Arbor Press.

Arbor Press manufacturers can vary in their measurements (even on their own presses) – want to confirm fit prior to ordering? Please check out the UnMinted Arbor Press Ram Size Checker.

—–
UnMinted Quick-Change Metal Stamping Jigs are designed to work with Arbor Presses which have an unmodified ram (no openings in the foot of the ram), and while stamping on a flat / level stamping surface.

This hand-tightened Nylon Locking Strap Mounting Version fits larger Arbor Presses which have rams measuring a true 1″ square or larger.

The UnMinted Quick-Change Metal Stamping Jig | Arbor Press Ram Edition | Nylon Locking Strap Version Includes:

• 1 Solid Nylon UnMinted Quick-Change Metal Stamping Jig with 5 Strong Neodymium Magnets installed (1 on top for mounting assist)
• 1 Nylon Locking Strap with Nylon Wing Nut
• 1 3D Printed Adapter with 1 Strong Neodymium Magnet (for mounting assist) – please select your ram adapter size of 1″, 1-1/8″, 1-1/4″, or 1-1/2″ when ordering
• Instructions Sheet

Jig Dimensions (Excludes Mounting Strap):
Height: 2.48″ (63mm)
Width: 1.19″ (30mm)

INSTALLING the UnMinted Quick-Change Metal Stamping Arbor Press Jig:
Start by lowering the ram of your press and position the UnMinted Quick-Change Metal Stamping Jig on the foot of your ram, and rest the ram down onto the jig using the upper magnet of the jig to help hold it in place. Position the 3d printed adapter on the opposite corner of the ram foot, using the magnet to assist. Position the nylon locking strap around the upper rounded portion of the jig and within the slot of the adapter so that the base of the wing nut mount is against the flat side of the adapter, with the wing nut facing you. Tighten the wing nut / locking strap until the jig and adapter are secured on the ram – this should be a nice, snug fit, but no need to over-tighten.

USING the UnMinted Quick-Change Metal Stamping Arbor Press Jig:
Once your Quick-Change Metal Stamping Jig is installed securely on the ram, then you’re ready for stamping!

Snap your metal stamp of choice into the corner pocket against the magnets and position your work piece under the stamp.

• Keeps your metal stamps straight for consistent impressions.
• Allows for easy positioning OVER your work.
• Allows for quick changes between a wide variety of metal stamps of varying shapes and sizes.
• Works with any brand metal stamp (as long as they are magnetic).

The UnMinted Quick-Change Metal Stamping Jigs work with a wide variety of metal stamps in varying shapes and sizes – regardless of brand.

*** Metal stamps and copper blanks shown are NOT included, and are shown for illustration purposes only ***

Original Version Video (Updated Nylon Mount Video Coming Soon):

©2022 Copyright – Unminted, LTD

—–

Magnet Warnings:

• This product contains (a) small magnet(s). Swallowed magnets can stick together across intestines causing serious infections and death. Seek immediate medical attention if magnet(s) are swallowed or inhaled.
• Magnetic Fields May Interfere With Pacemakers.
• California Proposition 65 Warning: Magnets are nickel-plated – Cancer and Reproductive Harm www.P65Warnings.ca.gov