The Details
Arbor Press manufacturers can vary in their measurements (even on their own presses) – this simple jig allows you to check the size of the ram on your Arbor Press to confirm which UnMinted Quick-Change Metal Stamping Jig mounting method will work best for your Arbor Press.
It even comes along with a unique $5 coupon code (1-time use), good towards your future purchase of the appropriate UnMinted Quick-Change Metal Stamping Jig | Arbor Press Edition, that best fits your arbor press – redeemable on UnMinted.ltd
PLEASE NOTE: Due to this jig shipping along with a free $5 off coupon code, there are no returns accepted for this item.
Simply check by fitting the jig over the foot of your Arbor Press ram – if the jig fits onto your ram with little to no wiggle room, then the Steel Collar mounting version will fit your press (most 1-Ton arbor press rams will work with the steel collar mount as they typically measure 24.5mm square – however, that’s not always the case).
If the size checker does not fit onto the foot of your ram, then the Nylon Locking Strap mounting version is the way to go (the nylon locking strap mounting method comes with your choice of 3d printed adapter, allowing the metal stamping jig to work with larger arbor presses, including 1-Ton, 2-Ton, and 3-Ton presses, with rams measuring a true 1″, 1-1/8″, 1-1/4″, or 1-1/2″).
The UnMinted Arbor Press Ram Checker Jig Includes:
- 1 3D Printed Arbor Press Ram Checker Jig
- $5 Coupon Code Good Towards Future Purchase of an UnMinted Quick-Change Metal Stamping Jig | Arbor Press Edition (Redeemable ONLY on UnMinted.ltd)
- Instructions Sheet
