UnMinted Half Dollar "Smile Face" Coin Cutting Tracing Jig

US Half Dollar | “Don’t Worry” Smile Tracing Jig

The UnMinted Smile Face Tracing Jigs are designed to make preparing for making your coin cut Smile Faces an easy start.

The jig includes:

  • 3D Printed Smile Face Tracing Jig for US Half Dollars
  • Instruction Sheet

$8.00

The Details

The UnMinted Smile Face Tracing Jigs are designed to make preparing for making your coin cut Smile Faces an easy start.

Simply place the coin into the straight edge side pocket of the 3D printed jig to draw a quick center line. Then move the coin over to the main pocket to align and trace your Smile Face using the center line and smile as a visual guide to align.

You’re then ready for cutting, sanding, shaping and finishing.

TIP: I recommend piercing against the inner edges of the eyes, and a small piercing at each corner of the smile. I cut this one with 2/0 blades.

Ultra Fine-Point Sharpie® Recommended.

** Here’s an example of how to use the tracing jigs:

©2021 Copyright UnMinted Coin Co., LTD. All rights Reserved.