UnMinted Half Dollar Cowboy Hat Puck Pusher Set

Cowboy Hat US Half Dollar Puck & Pusher Set

The Cowboy Hat Half Dollar Puck & Pusher Set is an UnMinted Coin Co. custom designed tool set, used for making cowboy hats from US Half Dollars.

The set includes:

  • Cowboy Hat Half Dollar Puck (3D Printed with 5/16″ Delrin Inserts)
  • Half Dollar Pusher (3D Printed)
  • Half Dollar Centering Washer (3D Printed)
  • 12mm Steel G25 Ball Bearing
  • Vinyl Centering Washer Target
  • Instructions Sheets **
You might also like:
NEW – Cowboy Hat Doming Pucks
(for easy centered doming, WITHOUT a dapping block)
Delrin® Mini-Pucks
(for easily flattening the brim after doming)
Cowboy Hat Crown Creaser
(for adding the crease on the top of the hats)

$56.00

The Details

Whether you’re new to coin jewelry or a seasoned pro, Half Dollar Cowboy Hats sell well at shows, make great conversation starters, and are fun to make. However, they can be challenging – getting consistent results, a nice center dome, getting even brim folds with no scratching – this set makes it easy.

Start by annealing your US Half Dollar (this makes it workable), then clean and polish it to your liking.

Use the centering washer and steel ball bearing on the 16mm hole of your steel dapping block for a perfect center dome. Give the half dollar a gentle press between the Delrin Mini-Pucks (or similar) to flatten the brim, then use the half dollar puck and pusher on your press to fold the brim evenly and consistently.

** Here’s how to use the sets:

*Please Note:
– This product assumes you have a torch for annealing, a steel dapping block with a 16mm opening, and a 1T arbor press (or greater, 6T press recommended).
– Flattening the brim after doming is an important step – you’ll get the best results, and helps prevent damage to the puck.
Any questions at all, please let me know.