UnMinted 1oz Round "Maltese Cross" Coin Cutting Tracing Jig

1 oz. Round | Maltese Cross Tracing Jig

The UnMinted Maltese Cross Tracing Jigs are designed to make preparing for making your coin cut Maltese Crosses an easy start.

The jig includes:

  • 3D Printed Maltese Cross Tracing Jig for 1oz. Rounds (sized for 39.3mm OD with 3mm Thickness)
  • Instruction Sheet

$8.00

The Details

The UnMinted Maltese Cross Tracing Jigs are designed to make preparing for making your coin cut Maltese Crosses an easy start.

Simply place the coin into the straight edge side pocket of the 3D printed jig to draw a quick center line. Then move the coin over to the main pocket to align and trace your Maltese Cross using the center line as a visual guide. You can trace two styles with this jig – a round Maltese Cross and an angular cross. For the angular cross, you would trace the two angles, then rotate the coin 180 degrees and trace them again.

You’re then ready for cutting, sanding, shaping and finishing.

Ultra Fine-Point Sharpie® Recommended.

** Here’s an example of how to use the tracing jigs:

©2021 Copyright UnMinted Coin Co., LTD. All rights Reserved.