US Quarter | Yin Yang Tracing Jig

The UnMinted Yin Yang Tracing Jigs are designed to make preparing for making your coin cut Yin Yang an easy start.

The jig includes:

  • 3D Printed Yin Yang Tracing Jig for US Quarters
  • Instruction Sheet

$8.00

The Details

The UnMinted Yin Yang Tracing Jigs are designed to make preparing for making your coin cut Yin Yang an easy start.

Simply place the coin into the straight edge side pocket of the 3D printed jig to draw a quick center line. Then move the coin over to the main pocket to align and trace your Yin Yang using the center line and hole punch as a visual guide to align, then rotate the coin 180 degrees and trace the opposite hole.

You’re then ready for cutting, sanding, shaping and finishing.

TIP: I used a punch with my Capri Tools Metal Punch for the holes. If sawing, I recommend piercing near the inside of each hole.

Ultra Fine-Point Sharpie® Recommended.

** Here’s an example of how to use the tracing jigs:

©2021 Copyright UnMinted Coin Co., LTD. All rights Reserved.